RE: [Geopriv] draft-winterbottom-geopriv-lis2lis-req-00.txt

From: Stuard, Doug ^lt;Doug.Stuard@andrew.com>
Date: Tue Jun 19 2007 - 14:32:10 EDT

James, In the referenced document it is stated: 5: The method used by the regional access LIS to determine the location of the end-point MUST be provided to the ISP LIS along with the determined location. I assume this is intended to be similar to the possource parameter in wireless. Are there standard codes for the various methods? Doug ----- Original Message ----- From: Winterbottom, James <mailto:James.Winterbottom@andrew.com> To: GEOPRIV <mailto:geopriv@ietf.org> Sent: Sunday, June 17, 2007 9:30 PM Subject: [Geopriv] draft-winterbottom-geopriv-lis2lis-req-00.txt Hi All, At the IETF meeting in Prague a decision was made to remove the LIS to LIS protocol requirements from the L7 LCP requirements document and put them in their own separate draft. Steve Norreys and I took the action to come up with a draft to address these requirements. http://www.ietf.org/internet-drafts/draft-winterbottom-geopriv-lis2lis-r eq-00.txt Comments welcome. Cheers James ------------------------------------------------------------------------ ------------------------ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any unauthorized use of this email is prohibited. ------------------------------------------------------------------------ ------------------------ [mf2] ________________________________ _______________________________________________ Geopriv mailing list Geopriv@ietf.org https://www1.ietf.org/mailman/listinfo/geopriv ------------------------------------------------------------------------------------------------ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any unauthorized use of this email is prohibited. ------------------------------------------------------------------------------------------------ [mf2]

_______________________________________________
Geopriv mailing list
Geopriv@ietf.org
https://www1.ietf.org/mailman/listinfo/geopriv
Received on Tue, 19 Jun 2007 14:32:10 -0400

This archive was generated by hypermail 2.1.8 : Tue Jun 19 2007 - 14:32:23 EDT